9-30a-00 Bilge
Blower
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| None |
9-30a-01I |
BILGE
BLOWER INSTRUCTIONS-. |
$5.00 |
$0.00 |
| None |
9-30a-02 |
RELAY
SWITCHING PLATE-Complete with both relays, timer tube socket, connector
terminal, wiring mounted on fender mounting plate. |
$201.96 |
$0.00 |
| None |
9-30a-03 |
BILGE
BLOWER RELAY-Small electrical relay box with SE 22 stamped on bottom. |
$47.85 |
$0.00 |
| None |
9-30a-04 |
BILGE
BLOWER RELAY-Small electrical relay box with SE 20 stamped on bottom. |
$47.85 |
$0.00 |
| None |
9-30a-06 |
ELECTRIC
VACUUM TUBE-Timer tube for bilge blower, looks like a T.V. tube. |
$124.59 |
$0.00 |
| None |
9-30a-07 |
BILGE
BLOWER RAIL CONNECTOR-. |
$5.69 |
$0.00 |
| None |
9-30a-08 |
RUBBER
INSULATION BASE-Fastens to relay switching plate to absorb vibration. |
$1.05 |
$0.00 |
| None |
9-30a-09 |
FUSE
HOLDER-For bilge blower. |
$6.79 |
$0.00 |
| None |
9-30a-10 |
FUSE-8
amp for fuse holder 9-30a-09. |
$0.19 |
$0.00 |
| None |
9-30a-11 |
WIRE
HARNESS-For bilge blower assembly. |
$53.06 |
$0.00 |
| None |
9-30a-12 |
RUBBER
GROMMET-Insulates bilge blower wire harness at body. |
$0.59 |
$0.00 |
| None |
9-30a-13 |
DASH
BILGE BLOWER SWITCH-Fits on dash panel between clock and speedometer to
10-31-16 manually turn on blower. |
$21.50 |
$0.00 |
| None |
9-30a-14 |
CHROME
DRESS NUT-Fastens bilge blower switch to dash. Highly polished chrome
plated brass. |
$6.61 |
$0.00 |
| None |
9-30a-15 |
KNOB
FOR PUSH-PULL SWITCH-See 10-31-15 group for knobs with lettering, such
as fan, defroster, and heat. Original Amphicar. |
$19.95 |
$0.00 |
| None |
9-30a-15B |
BLACK
KNOB-Replacement knob. See description under 10-31-15B. |
$3.95 |
$0.00 |
| None |
9-30a-15U |
WHITE
KNOB-Used, original Amphicar. See also 10-31-15U. |
$11.95 |
$0.00 |
| None |
9-30a-16 |
METAL
FASTENING PLATE-For button switch 9-30a-17. |
$5.25 |
$0.00 |
| None |
9-30a-17 |
EMERGENCY
START PUSH BUTTON SWITCH-White color button fits under left side of dash
by heater knobs. |
$17.39 |
$0.00 |
| None |
9-30a-17B |
EMERGENCY
START PUSH BUTTON SWITCH-Black color button fits under left side of dash
by heater knobs. |
$13.27 |
$0.00 |
| None |
9-30a-18 |
"EMERGENCY
START" PRINTING SHEET. |
$3.60 |
$0.00 |
| None |
9-30a-19 |
BILGE
BLOWER ASSEMBLY-Original housing and motor assembly on inside left
fender. |
$413.95 |
$0.00 |
| None |
9-30a-22 |
AIR
OUTLET HOUSING-Fastens to inside of left front fender to allow bilge
blower exhaust air to exit from bilge. |
$18.59 |
$0.00 |
| None |
9-30a-23 |
|
$39.95 |
$0.00 |
| None |
9-30a-24 |
RUBBER
GASKET-To seal bilge blower screen to left front fender. |
$6.55 |
$0.00 |
| None |
9-30a-25 |
METAL
AIR SUCTION BOTTOM END PIECE-Fits on end of bilge blower suction hose
below spare tire. |
$13.30 |
$0.00 |
| None |
9-30a-26 |
SUPPORT
BRACKET-From bottom of bilge blower to left front fender. |
$9.86 |
$0.00 |
| None |
9-30a-27 |
BRACKET-To
hold hose on suction end piece on car. |
$9.59 |
$0.00 |
| None |
9-30a-28 |
BILGE
BLOWER SUCTION HOSE-From below spare tire up to blower assembly. |
$8.51 |
$0.00 |
| None |
9-30a-29 |
OUTLET
HOSE-From blower assembly to outlet duct behind bilge blower chrome
screen. |
$6.53 |
$0.00 |
| None |
9-30a-30/31 |
CLAMP. |
$2.95 |
$0.00 |
| None |
9-30a
32 |
METAL
THREE-WAY HOSE CONNECTION-For cars with heater under gas tank. Fastens
to gas tank, next to bilge blower, connector fits in left defroster hose
with third outlet going to blower. |
$14.33 |
$0.00 |
| None |
9-30a-32a |
HOSE
CROSSOVER-"T"-For late style heater system. Fits between main
defroster hose. |
$14.33 |
$0.00 |
| None |
9-30a-33 |
AIR
HOSE-From early three-way connector 9-30a-32 to left defroster outlet. |
$5.93 |
$0.00 |
| None |
9-30a-33a |
HOT
AIR HOSE-From bilge blower to either metal "T" connector
9-30a-32 or 32a. |
$6.29 |
$0.00 |
| None |
9-30a-34 |
SCREW-For
bilge blower electronics plate. |
$0.96 |
$0.00 |
| None |
9-30a-35 |
SCREW-Small
blower plate screw. |
$0.65 |
$0.00 |
| None |
9-30a-36 |
NUT-For
above screw 9-30a-35. |
$0.31 |
$0.00 |
| None |
9-30a-37 |
LOCK
WASHER-For above screw 9-30a-35. |
$0.25 |
$0.00 |
| None |
9-30a-38 |
SCREW-Three
used on electrical plate of blower. |
$0.75 |
$0.00 |
| None |
9-30a-39 |
NUT-For
above screw 9-30a-38. |
$0.25 |
$0.00 |
| None |
9-30a-40 |
LOCK
WASHER-For above screw 9-30a-38. |
$0.25 |
$0.00 |
| None |
9-30a-41 |
SCREW-For
bilge blower electronics plate. |
$0.96 |
$0.00 |
| None |
9-30a-42 |
NUT-With
screw 9-30a-41. |
$0.25 |
$0.00 |
| None |
9-30a-43 |
CHROME
SCREW-To mount bilge blower fender screen, four needed. |
$1.17 |
$0.00 |
| None |
9-30a-44 |
BOLT-Fastens
bilge blower housing to end of bilge blower fender bracket. |
$0.36 |
$0.00 |
| None |
9-30a-45 |
BOLT-Fastens
bilge blower bracket to left fender inside trunk. |
$0.30 |
$0.00 |
| None |
9-30a-46 |
STAR
WASHER-For above bolt 9-30a-45. |
$0.25 |
$0.00 |
| None |
9-30a-47 |
NUT-For
above bolt 9-30a-45. |
$0.30 |
$0.00 |
| None |
9-30a-48 |
BOLT-Two
required to fasten blower assembly to body. |
$0.30 |
$0.00 |
| None |
9-30a-49 |
TOOTH
WASHER-With bolt 9-30a-48. |
$0.25 |
$0.00 |
| None |
9-30a-50 |
NUT-With
bolt 9-30a-48. |
$0.25 |
$0.00 |
