9-30-00 Radiator
Parts, Cooling System
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| 9-30-01 |
9-30-01b |
RADIATOR-Original
Amphicar. |
$390.27 |
$0.00 |
| 9-30-02 |
9-30-02 |
RADIATOR
CAP-Special pressure relief type made in Germany. |
$5.50 |
$0.00 |
| 9-30-03 |
9-30-03 |
DRAIN
HOSE-From radiator overflow. |
$6.09 |
$0.00 |
| 9-30-04 |
9-30-04a |
LOWER
AIR INTAKE FAN SHROUD-Clamps to engine side of radiator. Oil cooler
fastens to inside bottom of shroud. |
$280.45 |
$0.00 |
| None |
9-30-05a |
UPPER
AIR INTAKE FRAME-Clamps to upper side of radiator. Has hole on left
center for carburetor air intake hose. |
$71.14 |
$0.00 |
| 9-30-06 |
9-30-06 |
FASTENING
RAIL, UPPER SIDE-Rivets to either left or right upper radiator shroud,
fastening rubber intake strip to shroud. |
$8.25 |
$0.00 |
| 9-30-07 |
9-30-07 |
FASTENING
RAIL CENTER-Rivets to upper radiator shroud, fastening rubber intake
strip in place. |
$12.23 |
$0.00 |
| 9-30-08 |
9-30-08 |
SHROUD
SIDE RUBBER RAIL-Rivets fasten rail with shroud rubber 9-30-09 to left
rear side of upper radiator air intake shroud. |
$8.31 |
$0.00 |
| 9-30-09 |
9-30-09 |
WEATHERSTRIP
TOP INTAKE FRAME SEAL-Goes along entire top frame. When engine lid is
down, it seals against this seal to prevent hot engine compartment air
from being pulled through radiator by fan. |
$22.95 |
$0.00 |
| 9-30-10 |
9-30-10 |
WEATHERSTRIP
SIDE INTAKE SEAL, LEFT-Fastens to left side of upper shroud where shroud
rests against body. |
$8.51 |
$0.00 |
| None |
9-30-10a |
WEATHERSTRIP
SIDE INTAKE SEAL, RIGHT-Same as above 9-30-10, except for right side. |
$8.51 |
$0.00 |
| 9-30-18 |
9-30-18 |
SCREW-Fourteen
are used to fasten radiator to upper and lower shrouds. |
$0.38 |
$0.00 |
| 9-30-19 |
9-30-19 |
LOCK
WASHER-For use with screw 9-30-18. |
$0.25 |
$0.00 |
| 9-30-20 |
9-30-20 |
NUT-For
use with screw 9-30-18. |
$0.31 |
$0.00 |
| 9-30-21 |
9-30-21 |
WASHER-Provides
support for upper and lower radiator shroud brackets at outer edges. |
$0.66 |
$0.00 |
| 9-30-22 |
9-30-22a |
OIL
COOLER-Mounts inside fan shroud 9-30-04a. |
$115.60 |
$0.00 |
| 9-30-23 |
9-30-23 |
SEAL
BRACKET-Fastens rubber cool air sleeve on oil cooler. |
$9.49 |
$0.00 |
| None |
9-30-24 |
RUBBER
INSULATION SLEEVE-Fits around oil cooler and channels air through
cooler. |
$12.53 |
$0.00 |
| 9-30-25 |
9-30-25 |
GROMMET-Insulates
and holds oil cooler lines in fan shroud 9-30-04a. |
$2.09 |
$0.00 |
| 9-30-26 |
9-30-26 |
LOWER
RADIATOR HOSE |
$19.92 |
$0.00 |
| 9-30-27 |
9-30-27 |
CLAMP-For
both upper and lower radiator hose. |
$1.23 |
$0.00 |
| 9-30-28 |
9-30-28 |
SEAL
BRACKET-Smallest of rubber seal plates. |
$2.06 |
$0.00 |
| 9-30-29 |
9-30-29 |
SEAL
BRACKET-Metal plate with 2 holes. Rivets seal to lower left radiator
shroud. |
$3.22 |
$0.00 |
| 9-30-30 |
9-30-30 |
SEAL
BRACKET-Metal plate with 3 holes. Rivets seal to lower right radiator
shroud. |
$3.35 |
$0.00 |
| 9-30-31 |
9-30-31 |
BOTTOM
RUBBER SEAL-Rivets along bottom edge of radiator shroud to help insure
that only cold air is pulled through radiator and oil cooler. |
$24.21 |
$0.00 |
| 9-30-32 |
9-30-32 |
BOLT-Four
needed to fasten radiator shroud brackets to body. |
$0.40 |
$0.00 |
| 9-30-33 |
9-30-33 |
LOCK
WASHER-For radiator mounts and above bolt 9-30-32. |
$0.25 |
$0.00 |
| 9-30-34 |
9-30-34 |
FLAT
WASHER-Support washer to give additional strength for bolt 9-30-32. |
$0.25 |
$0.00 |
| 9-30-35 |
9-30-35 |
NUT-To
fasten radiator mounts and radiator bracket bolts. |
$0.25 |
$0.00 |
| 9-30-36 |
9-30-36 |
AIR
INTAKE HOSE-From air intake frame to air filter housing. |
$6.00 |
$0.00 |
| 9-30-37 |
9-30-37 |
UPPER
RADIATOR HOSE. |
$22.14 |
$0.00 |
| 9-30-38 |
9-30-38 |
RADIATOR
MOUNT-Four needed to mount radiator on car body. |
$8.75 |
$0.00 |
| 9-30-39 |
9-30-39 |
ADJUSTING
BRACKET, LEFT Radiator fastens to this bracket, which fastens to body. |
$23.19 |
$0.00 |
| None |
9-30-39a |
ADJUSTING
BRACKET, RIGHT-Same as 9-30-39, except fits right side. |
$23.19 |
$0.00 |
| 9-30-40 |
9-30-40 |
OIL
COOLER HOSE-Special high pressure line, oil cooler to engine, two per
car. |
$27.81 |
$0.00 |
| None |
9-30-41 |
INSULATION
HOSE-Black plastic beat shield hose covering oil cooler hose. |
$6.99 |
$0.00 |
| None |
9-30-42 |
PLASTIC
COVER-Fits in fan shroud and supports oil cooler hose metal lines. |
$5.36 |
$0.00 |
| None |
9-30-43 |
SCREW-Fastens
plastic cover 9-30-42 to radiator shroud. |
$0.31 |
$0.00 |
| 9-30-44 |
9-30-44 |
SEAL
BRACKET-3 hole metal strip seals 9-30-31 to center bottom of lower
radiator shroud. |
$4.17 |
$0.00 |
