8-27-00 Fuel Tanks Parts
Early Part Number Late Part Number Description Price Core Charge
8-27-01 8-27-01 FUEL TANK-Original Amphicar For cap, see 8-27-10 below. $525.07 $0.00
8-27-02 8-27-02 FUEL TAP WITH FUEL FILTER-Screws into bottom of gas tank. A $15.00 core charge will be refunded to you upon receipt of your old, rebuildable core. $99.35 $15.00
None 8-27-02a EARLY FUEL FILTER SEAL-White seal, 1" diameter, seals filter housing on tap. $3.19 $0.00
None 8-27-02aL LATE FUEL FILTER SEAL-Black seal, 1 1/4 " diameter, seals filter housing on tap. $3.19 $0.00
None 8-27-02b O-RING GASKET-Gasket fits in top of tap, seals against threaded pipe at bottom. $0.98 $0.00
None 8-27-02c FUEL FILTER-Screen mesh filter screws into tap inside filter housing. $6.19 $0.00
8-27-03 8-27-03 SHUT OFF HANDLE-Fits into fuel tap from inside car next to accelerator pedal. By turning this handle, you can turn gas flow on or off. $4.29 $0.00
None 8-27-03a COTTER PIN-Locks shut off handle in fuel tap. $0.17 $0.00
8-27-04 8-27-04 FUEL HOSE-3.5 meter hose from magneto shut off valve under gas tank to fuel pump. $29.21 $0.00
None 8-27-04a FUEL HOSE-Short piece from magneto valve to fuel tap on gas tank. $2.96 $0.00
8-27-0 8-27-05 CLAMP-Original type with smooth metal clamping band. Prevents clamp from cutting into fuel hose. Beware of universal small clamps with slotted bands. $1.31 $0.00
8-27-06 8-27-06 FUEL TANK FLOAT SENDING UNIT COMPLETE-Fits on top of gas tank with float. hanging down inside tank. Core charge of $10.00 refunded upon receipt of your old unit. $65.15 $10.00
None 8-27-06R FUEL TANK FLOAT SENDING UNIT COMPLETE-Rebuilt Amphicar. Same as above. Core charge of $10.00 refunded upon receipt of your old sending unit. $47.01 $10.00
8-27-07 8-27-07 GASKET-Seals tank sending unit 8-27-06 on top of gas tank. $1.29 $0.00
8-27-08 8-27-08 SCREW-Five needed to secure fuel tank sending unit on tank. $0.33 $0.00
8-27-09 8-27-09 TOOTH WASHER-To secure fuel tank sending unit fastening bolts on fuel tank. $0.25 $0.00
8-27-10 8-27-10 GAS CAP-With neoprene gasket. $21.47 $0.00
None 8-27-10aC GAS CAP GASKET- Cork type. Fits all cars, although it should be replaced often. $2.19 $0.00
None 8-27-10aR GAS CAP GASKET-Neoprene type. Longer lasting than cork type. $8.11 $0.00
8-27-11 8-27-11 FELT INSULATING STRIP-Glues to underside of fuel tank fastening straps and to body of car. Enough to fully insulate one side of tank. $6.09 $0.00
None 8-27-11a FELT INSULATING STRIP-Short piece insulates the bottom of tank that rests on body. $4.55 $0.00
None 8-27-11b LOCK WASHER-With bolt 8-27-29. $0.25 $0.00
8-27-12 8-27-12 BOLT-To join and fasten fuel tank mounting straps on top of tank. $0.45 $0.00
8-27-13 8-27-13 NUT-With above bolt 8-27-12. $0.31 $0.00
8-27-14 8-27-14 RUBBER HANDLE GROMMET-Mounts on fuel tap shut off handle. $0.72 $0.00
8-27-15 8-27-15 METAL GAS TANK STRAP, LONG-To fasten tank to inside of trunk. $22.10 $0.00
8-27-16 8-27-16 METAL STRAP, SHORT To fasten gas tank to inside of trunk, left side. $18.19 $0.00
None 8-27-16a METAL STRAP, SHORT To fasten gas tank to inside of trunk, right side. $18.19 $0.00
8-27-17 8-27-17 STRAP BRACKET-Mounts left gas tank strap to car body. $3.95 $0.00
None 8-27-17a STRAP BRACKET-Mounts right gas tank strap to car body. $3.95 $0.00
8-27-18 8-27-18 TOOTH WASHER-With nut 8-27-19. $0.25 $0.00
8-27-19 8-27-19 NUT-Fastens gas tank mounting strap brackets to body. $0.25 $0.00
None 8-27-21 FLARE WEDGE-Fits on metal fuel pipe end where it screws into fuel pump. $1.59 $0.00
None 8-27-22 PIPE FITTING-Brass threaded connector fits on short metal fuel pipe and fastens 1-06-30F to fuel pump. $6.30 $0.00
None 8-27-22a FLARE WEDGE- For fitting 8-27-22. $1.61 $0.00
None 8-27-23 TIRE PRESSURE STICKER LABEL-Placed on front side of fuel tank. Has tire pressure information in German and English. Label is approximately 1 1/4" x 4", self sticking. $4.65 $0.00
None 8-27-24 MAGNETO SHUT OFF VALVE-With ignition key off, magneto valve prevents gas from siphoning from gas tank into carburetor. Mounts behind spare tire in trunk floor. $91.29 $0.00
None 8-27-26KIT MAGNETO VALVE HOSE FITTING KIT-Contains two nipple-like fittings and two 8-27-27 compression nuts, which fasten fuel hose to magneto valve. $4.90 $0.00
None 8-27-28 CLAMP-See description under number 8-27-05. $1.31 $0.00
None 8-27-29 BOLT-To fasten magneto valve to body bracket under gas tank. $0.45 $0.00
None 8-27-30 NUT-With above bolt 8-27-29. $0.31 $0.00