11-43-00 Land Gear
Shift Controls
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| 11-43-01 |
11-43-01 |
FOUR-SPEED
GEAR LEVER-Used to shift car into different land speeds, mounts under
floor. |
$70.88 |
$0.00 |
| 11-43-02 |
11-43-02 |
MOUNTING
BRACKET-Aluminum housing fastens to Amphicar body and holds lever
11-43-01 and pivot joint 11-43-03 in place. |
$76.83 |
$0.00 |
| 11-43-02a |
11-43-02a |
FIBER
BUSHING-Shift rod joint on front end of four foot shift rod lying on
bottom of floor oscillates on this bushing. |
$6.15 |
$0.00 |
| 11-43-03 |
11-43-03 |
SHIFT
ROD JOINT-Bottom hole of four-speed shift lever mounts on this pivot
joint. |
$96.53 |
$0.00 |
| 11-43-04 |
11-43-04 |
SPACER
WASHER-One in front of aluminum shift bracket and one behind it,
providing friction surfaces for shift lever as it moves sideways. |
$2.83 |
$0.00 |
| 11-43-05 |
11-43-05 |
LOCKING
RING-Locks steel shift bracket 11-43-03 inside aluminum bracket
11-43-02. |
$1.09 |
$0.00 |
| 11-43-06 |
11-43-06 |
PIN
FOR SHIFT ROD AND HOUSING-Holds shift lever return spring. Top of pin
goes through aluminum housing 11-43-02. |
$24.09 |
$0.00 |
| 11-43-07 |
11-43-07 |
SPRING-Applies
tension to rebounding pin 11-43-06. |
$4.71 |
$0.00 |
| 11-43-08 |
11-43-08 |
FLAT
WASHER-Sits on top of rebounding pin 11-43-06. |
$1.85 |
$0.00 |
| 11-43-09 |
11-43-09 |
COTTER
PIN-Fits in rebounding pin 11-43-06 and holds it on aluminum bracket. |
$0.31 |
$0.00 |
| 11-43-10 |
11-43-10 |
BOLT-Two
needed to fasten bottom of shift lever to body and floor shaft. |
$0.65 |
$0.00 |
| 11-43-11 |
11-43-11 |
NUT-Four
used with bolt 11-43-10. |
$0.31 |
$0.00 |
| 11-43-12 |
11-43-12 |
FIBER
BUSHING-Long floor shift rod moves in the one inch hollow bushings, one
at each end of rod. |
$6.15 |
$0.00 |
| 11-43-13 |
11-43-13 |
WHITE
KNOB FOR FOUR-SPEED GEAR SHIFT LEVER-Original Amphicar with shift
pattern imprinted on top surface. |
$11.15 |
$0.00 |
| 11-43-14 |
11-43-14 |
NUT
TO LOCK SHIFT KNOB-This lock nut goes on shift lever before shift knob.
If then tightened against bottom of knob, locking it in desired
position. |
$2.95 |
$0.00 |
| 11-43-15 |
11-43-15 |
REINFORCEMENT-Fastens
to floor brace to give added strength when tightening aluminum shift
bracket 11-43-02. |
$4.71 |
$0.00 |
| 11-43-16 |
11-43-16 |
BOLT-Long
bolt fastens aluminum shift bracket to body. |
$1.19 |
$0.00 |
| 11-43-17 |
11-43-17 |
LOCK
WASHER-Needed with long bolt 11-43-16. |
$0.25 |
$0.00 |
| 11-43-18 |
11-43-18 |
NUT-Needed
with long bolt 11-43-16. |
$0.31 |
$0.00 |
| 11-43-19 |
11-43-19/20 |
BALL
SEAT JOINT COMPLETE-Includes ball screw 11-43-21. Fastens to rear of
floor shift rod. |
$41.29 |
$0.00 |
| 11-43-21 |
11-43-21 |
BALL
HEAD SCREW-Presses into ball seat joint. |
$14.73 |
$0.00 |
| 11-43-22 |
11-43-22 |
FLOOR
SHIFT CONNECTING ROD-About four feet long, front of rod mounts on four
speed shift lever and rear on transmission linkage. |
$78.28 |
$0.00 |
| 11-43-23 |
11-43-23 |
SHIFT
BRACKET-For back-up light linkage on front of water transmission. |
$2.62 |
$0.00 |
| 11-43-25 |
11-43-25 |
SUPPORT
BRACKET-For rear of floor shift rod. Fiber bushing 11-43-12 mounts
inside bracket. Order bushing separately. |
$22.68 |
$0.00 |
| 11-43-26 |
11-43-26 |
SHIFT
BALL TOP-Female seat fastens to land transmission shaft on front face of
transmission. "Sits" on ball seat 11-43-19/20. |
$40.41 |
$0.00 |
| 11-43-28 |
11-43-28 |
NUT-Thin
nut to lock locating stud bolts on floor shafts. |
$0.65 |
$0.00 |
| 11-43-32 |
11-43-32 |
METAL
FLANGE-Rubber gear shift boat stretches on this flange, which rivets to
floor board. |
$17.31 |
$0.00 |
| 11-43-33 |
11-43-33 |
RUBBER
GEAR SHIFT LEVER FLOOR BOOT-Original Amphicar. |
$21.36 |
$0.00 |
| None |
11-43-35 |
BRACKET
FOR REAR OF SHIFT LEVER AND SUPPORT BRACKET-Originally supplied on 1965-
1967 cars. This bracket modifies early cars to keep transmission
linkages from popping out of gear. |
$30.36 |
$0.00 |
| None |
11-43-36 |
TOOTH
WASHER-For bolt 11-43-37. |
$0.25 |
$0.00 |
| None |
11-43-37 |
BOLT-Two
needed to fasten aluminum support bracket on transmission bracket. |
$0.31 |
$0.00 |
| None |
11-43-38 |
RETURN
SPRING-Rebounding spring for pin 11-43-06 and aluminum bracket 11-43-02. |
$4.59 |
$0.00 |
