11-42-00 Cables
for Clutch, Accelerator, Choke, and Speed Control, Pedals
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| None |
11-42-01 |
CLUTCH
PEDAL FOOT LEVER-The pedal pad fastens to this lever. |
$42.63 |
$0.00 |
| 11-42-02 |
11-42-02 |
PEDAL
LEVER BUSHING-Goes in bottom of each pedal lever to allow foot pedals to
move back and forth on pedal shaft. |
$6.31 |
$0.00 |
| 11-42-03 |
11-42-03 |
RUBBER
PEDAL PAD-Original Amphicar. New for clutch and brake pedals. |
$21.07 |
$0.00 |
| 11-42-04 |
11-42-04 |
BRAKE
PEDAL FOOT LEVER-The pedal pad fastens to this lever. |
$42.63 |
$0.00 |
| 11-42-05 |
11-42-05 |
ACCELERATOR
PEDAL LEVER-Sits under toe board, connects to accelerator linkage rod
11-42-39. |
$13.85 |
$0.00 |
| None |
11-42-05a |
ACCELERATOR
CABLE BRACKET-For right hand drive cars. |
$5.12 |
$0.00 |
| 11-42-06 |
11-42-06 |
PEDAL
SHAFT-The clutch, brake and accelerator assemblies ride on this shaft.
If the shaft gets rusty, the pedals will "stick". |
$32.55 |
$0.00 |
| 11-42-07 |
11-42-07 |
BRACKET-Keeps
pedal shaft in place on body. |
$2.92 |
$0.00 |
| 11-42-08 |
11-42-08 |
BOLT-Fastens
bracket 11-42-07 on body. |
$0.31 |
$0.00 |
| 11-42-09 |
11-42-09 |
LOCK
WASHER-For bolt 11-42-08. |
$0.25 |
$0.00 |
| 11-42-10 |
11-42-10 |
NUT-For
bolt 11-42-08. |
$0.25 |
$0.00 |
| 11-42-11 |
11-42-11 |
SPACER
WASHER-On cotter pin end of pedal shaft. |
$1.79 |
$0.00 |
| 11-42-12 |
11-42-12 |
COTTER
PIN-Holds pedal shaft behind spacer washer 11-42-11. |
$0.55 |
$0.00 |
| 11-42-13 |
11-42-13 |
BOLT-For
pedal shaft. |
$0.43 |
$0.00 |
| 11-42-14 |
11-42-14 |
NUT-For
bolt 11-42-13. |
$0.29 |
$0.00 |
| 11-42-15 |
11-42-15 |
HAND
THROTTLE CABLE-To set water speed without using foot on accelerator
pedal, complete with outer housing. |
$55.16 |
$0.00 |
| 11-42-16 |
11-42-16 |
CLAMP-Fastens
hand throttle cable housing under dash. |
$0.71 |
$0.00 |
| 11-42-17 |
11-42-17 |
BOLT-To
fasten clamp 11-42-16 on body. |
$0.31 |
$0.00 |
| 11-42-18 |
11-42-18 |
LOCK
WASHER-Used with bolt 11-42-17. |
$0.24 |
$0.00 |
| 11-42-19 |
11-42-19 |
CABLE
ADJUSTMENT SCREW-Tiny set screw goes on end of both accelerator cable
and hand throttle cable an locks them for correct amount of cable
travel. |
$1.27 |
$0.00 |
| 11-42-20 |
11-42-20 |
CLUTCH
PEDAL LINKAGE-Connects pedal lever to triangle clutch cable bracket. |
$4.69 |
$0.00 |
| 11-42-21 |
11-42-21 |
PIVOT
CAM PLATE-Triangle shaped plate which fastens clutch cable to body and
foot lever under toe board. |
$4.99 |
$0.00 |
| 11-42-22 |
11-42-22 |
CLUTCH
CABLE ASSEMBLY-New style includes inner cable, outer black housing,
clevis fork and body fastening hardware. Once installed, you will never
have to remove toe board for future cable replacements, as cable
unscrews from clevis fork from under front |
$48.73 |
$0.00 |
| 11-42-23 |
11-42-23 |
PIN. |
$4.91 |
$0.00 |
| 11-42-24 |
11-42-24 |
PIN. |
$4.91 |
$0.00 |
| 11-42-25 |
11-42-25 |
FLAT
WASHER-Behind pins 11-42-23 and 24. |
$0.25 |
$0.00 |
| 11-42-26 |
11-42-26 |
COTTER
PIN-Fit on pins 11-42-23 and 24. |
$0.16 |
$0.00 |
| 11-42-27 |
11-42-27 |
ACCELERATOR
LEVER LINKAGE-Fits on bottom of pedal lever. About four inches long with
hole at each end, two required to connect cable linkage triangle to
pedal lever. |
$4.75 |
$0.00 |
| 11-42-28 |
11-42-28/28a |
FRONT
BRACKET-For accelerator cable, triangle shaped with three holes for pins
which hold linkage to body. |
$12.57 |
$0.00 |
| 11-42-29 |
11-42-29 |
ACCELERATOR
CABLE ASSEMBLY-Includes inner cable, outer black housing, clevis pin,
and body fastening hardware. |
$44.05 |
$0.00 |
| 11-42-30 |
11-42-30 |
CONNECTING
PIN-To fasten accelerator cable at accelerator pedal end. |
$5.23 |
$0.00 |
| 11-42-31 |
11-42-31 |
FLAT
WASHER-With connecting pin 11-42-30. |
$0.25 |
$0.00 |
| 11-42-32 |
11-42-32 |
COTTER
PIN-To secure pin 11-42-30 on bracket. |
$0.14 |
$0.00 |
| 11-42-34 |
11-42-34 |
BALL
NUT-Clutch adjustment nut, rounded side fits against transmission clutch
lever on end of clutch cable. |
$7.53 |
$0.00 |
| 11-42-35 |
11-42-35 |
RETURN
SPRING-Applies tension on accelerator pedal linkage lever to keep it "up"
when not being used. |
$9.91 |
$0.00 |
| 11-42-36 |
11-42-36 |
RETURN
SPRING-Two used, one to return clutch pedal and the other to return the
brake pedal to "up" position. |
$9.91 |
$0.00 |
| 11-42-37 |
11-42-37 |
ACCELERATOR
PEDAL ASSEMBLY-Actual pedal the foot pushes on the toe board. |
$60.41 |
$0.00 |
| 11-42-38 |
11-42-38 |
SCREW-Screw
used to fasten accelerator pedal to toe board. |
$0.42 |
$0.00 |
| 11-42-39 |
11-42-39 |
ACCELERATOR
LINKAGE ROD-Goes from rear of accelerator pedal to pedal lever. |
$5.25 |
$0.00 |
| 11-42-41 |
11-42-41 |
FLAT
WASHER-Used with pin 11-42-40. |
$0.25 |
$0.00 |
| 11-42-42 |
11-42-42 |
COTTER
PIN-To secure pin 11-42-40. |
$0.25 |
$0.00 |
| None |
11-42-43 |
SHIM
WASHER-To eliminate side play of foot pedals on pedal shaft. |
$0.71 |
$0.00 |
| None |
11-42-45 |
CHOKE
CABLE ASSEMBLY-Includes both cable and outer black housing. |
$59.50 |
$0.00 |
| None |
11-42-46 |
CABLE
CLAMP-Fastens choke cable housing on top of muffler bracket 8-28-07. |
$0.70 |
$0.00 |
| None |
11-42-47 |
NUT-With
screw 11-42-49 to secure cable clamp 11-42-46 on muffler bracket. |
$0.25 |
$0.00 |
| None |
11-42-48 |
LOCK
WASHER-Used with screw 11-42-49. |
$0.25 |
$0.00 |
| None |
11-42-49 |
SCREW-To
secure clamp 11-42-46 on muffler bracket. |
$0.25 |
$0.00 |
