11-39-00 Front
Trunk Lid (Hood)
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| 11-39-00 |
11-39-01 |
FRONT
HOOD ASSEMBLY-Duplication of original Amphicar steel hood. This
fiberglass composite is state-of-the-art in detail, strength, and
beauty. Whether you're replacing a rusted hood or storing your steel
hood as an investment, this hood will keep your boating dry and
carefree. |
$499.00 |
$0.00 |
| 11-39-01 |
11-39-01a |
SUPPORT
LEVER-To keep trunk lid up when open. |
$6.75 |
$0.00 |
| None |
11-39-01AB |
ANCHOR
BRACKET-Mounts permanently on underside of hood and holds rear of hood
support lever. Cotter pin and washer on lever at this bracket. |
$6.75 |
$0.00 |
| None |
11-39-01LB |
PINCH
BRACKET-For trunk lid support lever. Holds front of lever against
underside of hood when trunk is closed. |
$5.72 |
$0.00 |
| 11-39-02 |
11-39-02 |
FLAT
WASHER -With cotter pin, holds hood support lever on hood anchor. |
$0.31 |
$0.00 |
| 11-39-03 |
11-39-03 |
COTTER
PIN-Used with washer 11-39-02. |
$0.24 |
$0.00 |
| 11-39-04 |
11-39-04 |
CATCH
LOCK, LEFT-Mounts on left underside on front of hood. By turning the
catch key tool, a tongue in the catch lock twists against the body
locking left side of hood on body. |
$25.66 |
$0.00 |
| None |
11-39-04a |
CATCH
LOCK, RIGHT-Same as above, except fits right underside of hood. |
$25.66 |
$0.00 |
| 11-39-05 |
11-39-05 |
SCREW-Mounts
catch locks on front underside of hood. |
$0.37 |
$0.00 |
| 11-39-06 |
11-39-06 |
CHROME
CATCH KEY-Original Amphicar "T" handle with closed loop at
top, locks hood and rear deck id. |
$18.70 |
$0.00 |
| 11-39-08 |
11-39-08 |
BRACKET
FOR SAFETY SPRING-Holds safety catch spring on underside of hood. |
$6.75 |
$0.00 |
| 11-39-09 |
11-39-09 |
BOLT-Holds
bracket 11-39-08 on hood. |
$0.31 |
$0.00 |
| 11-39-10 |
11-39-13 |
LOCK
WASHER-For bolt 11-39-09. |
$0.25 |
$0.00 |
| 11-39-11 |
11-39-11 |
FRONT
HOOD UPPER WEATHERSTRIP-This fourteen foot long strip glues to the
underside of the hood along edge. Also see hood body strip 11-34-25, and
glue on last page under 3M-1. |
$53.55 |
$0.00 |
| 11-39-12 |
11-39-12 |
BOLT-Used
to fasten hood to hood hinges. |
$0.43 |
$0.00 |
| 11-39-13 |
11-39-13 |
LOCK
WASHER-Used with bolt 11-39-12. |
$0.25 |
$0.00 |
| 11-39-14 |
11-39-14 |
FLAT
WASHER-For extra support on hood mounting bolts 11-39-12. |
$0.25 |
$0.00 |
| 11-39-15 |
11-39-15 |
CHROME
CATCH COVER-Covers front hood lock openings, rear engine cover locks,
and marine light pole-socket on engine lid. Excellent condition. |
$59.95 |
$0.00 |
| None |
11-39-15/3 |
ECONOMY
CATCH COVER-Same as above, except chrome has a satin or "brushed"
look. |
$19.50 |
$0.00 |
| None |
11-39-15a |
GASKET-Gray
molded quarter-sized gasket, goes on inside of upper lid of chrome catch
cover. |
$7.95 |
$0.00 |
| 11-39-16 |
11-39-16 |
BASE
GASKET-Fits between bottom of catch cover and top of hood. |
$2.15 |
$0.00 |
| 11-39-17 |
11-39-17 |
SPECIAL
CHROME SCREW-Holds chrome catch cover on front hood and rear engine
cover. |
$0.63 |
$0.00 |
| None |
11-39-18 |
SPACER
SHIM FOR CATCH LOCK-Fits between underside of hood and catch lock
assembly, 1mm thickness. |
$3.63 |
$0.00 |
| None |
11-39-18a |
SPACER
SHIM-Same as 11-39-18, except 2mm thickness. |
$3.63 |
$0.00 |
| None |
11-39-19 |
HORN
BRACKET-Welds to center of under brace closest to windshield. Bracket
has fixed nut to which horn tongue goes through top of hood for
fastening to this bracket. |
$11.02 |
$0.00 |
