1-10-00 Generator,
Starter and Internal Parts
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| 1-10-02 |
1-10-02 |
GENERATOR
SHAFT NUT-Holds generator pulley on end of shaft. |
$1.25 |
$0.00 |
| None |
1-10-02a |
FLAT
WASHER-Sits behind nut 1-10-02. |
$0.75 |
$0.00 |
| 1-10-03 |
1-10-03 |
GENERATOR
BRUSH SET-Two carbon brushes for generator repair, price is for two
brushes. |
$9.35 |
$0.00 |
| 1-10-04 |
1-10-04SET |
TENSION
SPRING-Set required to push carbon brushes against generator armature.
Price is for one set of two springs. |
$3.45 |
$0.00 |
| None |
1-10-05TC |
COPPER
TERMINAL CLIP-Fits the large terminal end on generator end plate
1-10-05. |
$1.05 |
$0.00 |
| 1-10-06 |
1-10-06 |
BUSHING-At
commutator end of generator. |
$4.75 |
$0.00 |
| 1-10-08 |
1-10-08 |
BEARING
RETAINER-Holds ball bearing inside aluminum bracket at pulley end of
generator. |
$2.97 |
$0.00 |
| 1-10-09 |
1-10-09 |
BALL
BEARING-On generator pulley end of generator. |
$16.95 |
$0.00 |
| None |
1-10-09A |
ALUMINUM
BRACKET-At generator pulley end of generator with two mounting holes.
Complete with new ball bearing 1-10-09. |
$26.11 |
$0.00 |
| None |
1-10-11B |
STARTER
MOTOR COMPLETE-Original Amphicar exchange unit, plus $25.00 core charge
until you mail us your old starter. |
$75.30 |
$25.00 |
| 1-10-13 |
1-10-13 |
STARTER
BRUSH SET-Four carbon brushes for starter repair, price is for all four
brushes. |
$13.15 |
$0.00 |
| 1-10-14/17SET |
1-10-14/17SET |
STARTER
SPRING SET-Set of four springs for brushes of starter motor. |
$14.33 |
$0.00 |
| 1-10-19 |
1-10-19 |
BUSHING-At
brush end of armature. |
$1.69 |
$0.00 |
| 1-10-22 |
1-10-22 |
BUSHING-At
starter drive end of armature. |
$1.69 |
$0.00 |
| 1-10-31 |
1-10-31 |
ALIGNMENT
BRACKET PLATE-Fits on starter drive end of starter to property position
the starter in the clutch bell housing. |
$3.49 |
$0.00 |
| 1-10-32 |
1-10-32 |
SHIM
FOR ALIGNMENT BRACKET PLATE-Use as required if plate 1-10-31 is not
quite thick enough for proper engaging of starter. |
$3.49 |
$0.00 |
| None |
1-10-33 |
BOLT-STARTER
MOUNTING-Fastens starter to engine. |
$2.19 |
$0.00 |
| None |
1-10-34 |
NUT-Two
needed to fasten starter to engine. |
$0.47 |
$0.00 |
| 1-10-35 |
1-10-35 |
LOCK
WASHER-Heat treated to lock rocker pedestal, manifold or starter
mounting bolt. |
$0.85 |
$0.00 |
