1-04-00 Water
Pump, Fan Belt, Thermostat
| Early
Part Number |
Late
Part Number |
Description |
Price |
Core
Charge |
| None |
1-04-01 |
MAJOR
WATER PUMP ASSEMBLY-Complete with water pump in housing, new thermostat
in new housing, new fan blade assembly ready for immediate installation.
Core charge of $15.00. Will be credited to you upon receipt of your
rebuildable core. |
$259.67 |
$0.00 |
| 1-04-01 |
1-04-01a |
OUTER
WATER PUMP HOUSING-Without water pump. Pump fastens on housing, which
1-04-02a, which is no longer available separately. Core charge of $15.00
will be credited to you upon receipt of your rebuildable core. |
$88.75 |
$0.00 |
| None |
1-04-02a/14 |
REBUILT
WATER PUMP WITHOUT PULLEY- Core charge of $15.00 will be credited to you
upon receipt of your rebuildable core. |
$99.86 |
$0.00 |
| None |
1-04-02a/14/21 |
BASIC
WATER PUMP ASSEMBLY-Includes water pump with pulley1-04-21, premounted
on Pump, plus one 1-04-14 mounting gasket. Note: this pump replaces part
number 1-04-02a, which Is no longer available separately. Core charge of
$15.00 will be credited to you upon recipt of your rebuildable core. |
$99.86 |
$0.00 |
| 1-04-04 |
1-04-04 |
PLUG-Water
pump grease access. |
$1.31 |
$0.00 |
| None |
1-04-04a |
GREASE
FITTING-Replaces plug 1-04-04. Use only water pump grease. |
$3.25 |
$0.00 |
| 1-04-05 |
1-04-05 |
WATER
PUMP SHAFT- |
$10.61 |
$0.00 |
| 1-04-06 |
1-04-06 |
WATER
PUMP SEAL-At impeller. |
$7.29 |
$0.00 |
| 1-04-07 |
1-04-07 |
IMPELLER-The
blades which you can see on the outside of the pump. |
$13.29 |
$0.00 |
| 1-04-08 |
1-04-08 |
WATER
PUMP SEAL-At pulley end. |
$3.33 |
$0.00 |
| 1-04-09 |
1-04-09 |
WASHER-At
pulley end. |
$0.95 |
$0.00 |
| 1-04-10 |
1-04-10 |
CIRCLIP-Between
seal 1-04-08 and washer 1-04-09. |
$0.81 |
$0.00 |
| 1-04-11 |
1-04-11 |
BALL
BEARING-Two required per water pump. |
$16.15 |
$0.00 |
| 1-04-12 |
1-04-12 |
DISTANCE
BUSHING-In front of ball bearing. |
$3.69 |
$0.00 |
| 1-04-13 |
1-04-13 |
CIRCLIP. |
$1.59 |
$0.00 |
| 1-04-14 |
1-04-14 |
GASKET-Seals
water pump on water pump housing. |
$5.70 |
$0.00 |
| 1-04-15 |
1-04-15 |
NUT-Three
needed to fasten water pump to housing. |
$0.95 |
$0.00 |
| 1-04-16 |
1-04-16 |
LOCK
WASHER-With above nut 1-04-15. |
$0.28 |
$0.00 |
| 1-04-17 |
1-04-17 |
GASKET-Seals
water pump housing on cylinder head. |
$5.93 |
$0.00 |
| None |
1-04-17a |
BOLT-Short
one of three, fastening water pump housing on cylinder head. |
$2.93 |
$0.00 |
| 1-04-18 |
1-04-18 |
BOLT-Middle
size of three bolts holding water pump housing on cylinder head. |
$2.93 |
$0.00 |
| 1-04-19 |
1-04-19 |
LONG
BOLT-The longest of the three bolts holding water pump on cylinder head. |
$2.93 |
$0.00 |
| 1-04-20 |
1-04-20 |
LOCK
WASHER-For bolts 1-04-17a, 18 and 19. |
$0.28 |
$0.00 |
| 1-04-2 |
1-04-21 |
WATER
PUMP/FAN BLADE PULLEY-Mounts on water pump. |
$24.69 |
$0.00 |
| 1-04-22 |
1-04-22 |
KEYWAY-On
water pump shaft for water pump pulley. |
$1.45 |
$0.00 |
| 1-04-23 |
1-04-23 |
PRESSURE
WASHER-Sits behind lock nut holding water pump pulley on pump. |
$1.21 |
$0.00 |
| 1-04-24 |
1-04-24 |
ELASTIC
STOP NUT-Secures water pump pulley on pump. |
$1.37 |
$0.00 |
| 1-04-25 |
1-04-25 |
FAN
BLADE ASSEMBLY-New original Amphicar six bladed fan blade. |
$67.10 |
$0.00 |
| 1-04-26 |
1-04-26 |
BALANCING
WEIGHT-To balance fan blade on water pump pulley. |
$3.10 |
$0.00 |
| 1-04-27 |
1-04-27 |
BOLT-Four
needed to fasten fan blade on water pump pulley. |
$1.33 |
$0.00 |
| 1-04-28 |
1-04-28 |
LOCK
WASHER-Four needed to lock fan bolts on pulley. Also, three needed to
lock oil pick up tube plate to oil pump housing. |
$0.28 |
$0.00 |
| 1-04-29 |
1-04-29 |
FAN
BELT-Original Amphicar. Always keep a spare belt next to the battery, in
case one breaks while cruising on your favorite lake. |
$8.95 |
$0.00 |
| None |
1-04-30KIT |
THERMOSTAT
RENEWAL KIT-Includes new generation thermostat 1-04-30b, distance
flange, two thermostat gaskets 1-04-32, and two longer top housing
fastening. |
$23.12 |
$0.00 |
| None |
1-04-30 |
ORIGINAL
THERMOSTAT- |
$39.95 |
$0.00 |
| 1-04-31 |
1-04-31 |
THERMOSTAT
HOUSING-Goes on top of thermostat with outlet at top for upper radiator
hose. |
$33.75 |
$0.00 |
| 1-04-32 |
1-04-32 |
THERMOSTAT
GASKET-Seals thermostat in housing. |
$2.19 |
$0.00 |
| None |
1-04-33 |
BOLT-For
thermostat housing. |
$1.39 |
$0.00 |
| None |
1-04-34 |
LOCK
WASHER-For use with bolts 1-04-33, 35. |
$0.28 |
$0.00 |
| None |
1-04-35 |
BOLT-For
thermostat housing. |
$1.39 |
$0.00 |
| None |
1-04-36 |
GROMMET-Insulates
metal fuel line on bracket at thermostat housing. 1-06-32. |
$1.13 |
$0.00 |
| None |
1-04-37 |
BRACKET-Supports
metal fuel line on top of thermostat housing. 1-06-31. |
$3.59 |
$0.00 |
