| Early Part Number | Late Part Number | Description | Price | Core Charge |
|---|---|---|---|---|
| None | 1-03-01KIT | CRANKSHAFT RENEWAL KIT-Contains one boiled, magnafluxed crankshaft, reground and polished. Includes matching set of original connecting rod bearings and set of main bearings. Core charge of $35.00 will be refunded to you upon receipt of your old rebuildable crankshaft. | $274.54 | $0.00 |
| 1-03-02std. | 1-03-02std. | MAIN BEARING SET-Complete set of three main bearings for one crankshaft, standard size. | $47.90 | $0.00 |
| None | 1-03-02a | FIRST UNDERSIZE .010 | $47.19 | $0.00 |
| None | 1-03-02b | SECOND UNDERSIZE .020 | $47.19 | $0.00 |
| None | 1-03-02c | THIRD UNDERSIZE .030 | $47.19 | $0.00 |
| 1-03-03 | 1-03-03 | THRUST WASHER, STANDARD SIZE-Installed at flywheel end of crankshaft. | $5.49 | $0.00 |
| 1-03-03 | 1-03-03a | THRUST WASHER, OVERSIZE-Installed at flywheel end of crankshaft when thicker size. | $5.49 | $0.00 |
| 1-03-04 | 1-03-04 | SHIM-For front of crankshaft. | $3.61 | $0.00 |
| 1-03-04a | 1-03-04a | SHIM-For front of crankshaft, second size. | $3.61 | $0.00 |
| 1-03-05 | 1-03-05 | CRANKSHAFT TIMING GEAR. | $66.35 | $0.00 |
| 1-03-06 | 1-03-06 | SLINGER-Fits on crankshaft between crank timing gear and timing cover seal. Slings oil toward engine. | $5.75 | $0.00 |
| 1-03-07 | 1-03-07 | CRANKSHAFT PULLEY-Replace if grooved by old timing cover oil seal. | $94.25 | $0.00 |
| 1-03-08 | 1-03-08 | KEYWAY-For crankshaft pulley. | $2.37 | $0.00 |
| 1-03-09 | 1-03-09 | BUSHING-For end of transmission shaft. Bushing fits in rear of crankshaft. | $7.42 | $0.00 |
| 1-03-10 | 1-03-10 | CRANKSHAFT NUT-Holds pulley on front of crankshaft. | $15.99 | $0.00 |
| None | 1-03-11a | STARTER RING GEAR-Presses on flywheel. has teeth to engage starter drive. | $56.90 | $0.00 |
| 1-03-12 | 1-03-12 | DOWEL PIN-To position pressure plate on flywheel. | $2.79 | $0.00 |
| 1-03-13 | 1-03-13 | DOWEL PIN-To position flywheel on crankshaft. | $2.79 | $0.00 |
| 1-03-14 | 1-03-14 | FLYWHEEL BOLT-Four needed per flywheel. | $1.97 | $0.00 |
| 1-03-15 | 1-03-15 | LOCKING TAB-To lock flywheel mounting bolts. | $1.23 | $0.00 |
| 1-03-16 | 1-03-16 | CAMSHAFT-New original Amphicar. | $185.20 | $0.00 |
| 1-03-17 | 1-03-17 | HOLDING PLATE-Holds front of camshaft. | $8.19 | $0.00 |
| 1-03-18 | 1-03-18 | BOLT-Two required to mount plate 1-03-17 on engine block. | $0.67 | $0.00 |
| 1-03-19 | 1-03-19 | LOCK WASHER-For bolt 1-03-18. | $0.28 | $0.00 |
| 1-03-19a | 1-03-19a | DOWEL PIN-To position timing cover. | $2.85 | $0.00 |
| 1-03-20 | 1-03-20 | CAMSHAFT GEAR. | $29.21 | $0.00 |
| 1-03-21 | 1-03-21 | SCREW-To fasten chain gear to camshaft. | $1.01 | $0.00 |
| 1-03-22 | 1-03-22 | LOCKING TAB-Timing chain wheel to camshaft. | $1.15 | $0.00 |
| 1-03-23 | 1-03-23 | TIMING CHAIN. | $40.85 | $0.00 |
| 1-03-25 | 1-03-25 | OIL SEAL IN TIMING COVER. | $9.71 | $0.00 |
| 1-03-26 | 1-03-26 | GASKET-For timing cover to front engine plate. | $5.65 | $0.00 |
| None | 1-03-26a | LOCK WASHER-To secure timing cover screws 1-03-26b. | $0.28 | $0.00 |
| None | 1-03-26b | SCREW-Flat screw driver head type, five needed to secure timing cover on block. | $1.99 | $0.00 |
| None | 1-03-26c | BOLT-Hex bolt to fasten timing cover to block. Also see 1-03-26b for additional. | $1.21 | $0.00 |
| None | 1-03-26d | LOCK WASHER-For bolt 1-03-26c. | $0.28 | $0.00 |
| 1-03-27 | 1-03-27 | MOUNTING BRACKET-Holds chain tensioner on timing cover. | $1.67 | $0.00 |
| 1-03-29 | 1-03-29 | TIMING CHAIN TENSIONER, | $6.73 | $0.00 |
| 1-03-30 | 1-03-30 | DOWEL PIN-To secure chain tensioner on timing cover. | $2.95 | $0.00 |
| 1-03-32 | 1-03-32 | CONNECTING ROD-New original Amphicar. | $174.50 | $0.00 |
| 1-03-33 | 1-03-33 | BUSHING FOR CONNECTING ROD-At piston pin end. | $4.59 | $0.00 |
| 1-03-34 | 1-03-34 | DOWEL, CONNECTING ROD-Two fit on bearing end of connecting rod to align it to connecting rod cap. | $1.41 | $0.00 |
| 1-03-35 | 1-03-35 | BOLT, CONNECTING ROD-To fasten connecting rod to crankshaft. | $5.44 | $0.00 |
| 1-03-36 | 1-03-36 | LOCKING TAB-For rod bearing caps. | $1.29 | $0.00 |
| 1-03-37std. | 1-03-37std. | CONNECTING ROD BEARING-Set of four standard size, original Amphicar. | $52.05 | $0.00 |
| None | 1-03-37a | CONNECTING ROD BEARING-Set of four undersize .010, original Amphicar. | $53.22 | $0.00 |
| None | 1-03-37b | CONNECTING ROD BEARING-Set of four undersize .020, original Amphicar. | $53.22 | $0.00 |
| None | 1-03-37c | CONNECTING ROD BEARING-Set of four undersize .030, original Amphicar. | $53.22 | $0.00 |
| 1-03-38 | 1-03-38Fstd. | PISTON COMPLETE WITH PISTON RINGS-"F" grade, standard size. Note: Amphicar pistons were manufactured in three different grades. These grades are IF". "Gs', and "H". Pistons were marked by these grade letters at the time of production to be sure pistons installed in the engines were exctly the same weight in eachsize. Therefore, if you need to replace only one piston in a standard size, you only need to order on replacement piston of the same "etter" grade in your engine. If you are replacing all four pistons, you can use any "letter" grade. Also, see part number 1-02-18a in case you need piston cylinder liners. | $95.70 | $0.00 |
| None | 1-03-38aGstd. | PISTON COMPLETE WITH PISTON RINGS-"G" grade in standard size. Also see part number 1-02-18a in case you need piston cylinder liners. | $95.70 | $0.00 |
| None | 1-03-38bHstd. | PISTON COMPLETE WITH PISTON RINGS-"H" grade in standard size. Also see part number 1-02-18a in case you need piston cylinder liners. | $95.70 | $0.00 |
| None | 1-03-38c | PISTON OVERSIZE COMPLETE WITH PISTON RINGS-Size .020. Does not require piston liner 1-02-18a. | $107.70 | $0.00 |
| None | 1-03-38c | PISTON OVERSIZE COMPLETE WITH PISTON RINGS-Size .030. Does not require piston liner 1-02-18a. | $107.70 | $0.00 |
| None | 1-03-38c | PISTON OVERSIZE COMPLETE WITH PISTON RINGS-Size .040. Does not require piston liner 1-02-18a. | $107.70 | $0.00 |
| None | 1-03-39/40/41 | PISTON RING SET, STANDARD SIZE-Contains all twelve rings. Four compression, middle and oil rings for complete renewal of piston rings. | $78.60 | $0.00 |
| None | 1-03-39b/40b/41b | PISTON RING SET, .020 OVERSIZE-Fits cylinders bored out to .020 size. | $78.60 | $0.00 |
| None | 1-03-39c/40c/41c | PISTON RING SET, .030 OVERSIZE-Fits cylinders bored out to .030 size. | $91.88 | $0.00 |
| 1-03-42 | 1-03-42 | PISTON PIN-Fastens piston to connecting rod. | $5.90 | $0.00 |
| 1-03-44/45/46 | 1-03-44/45/46 | DISTRIBUTOR DRIVING GEAR WITH SHAFT-Shaft 1-03-45 tip fits into oil pump and gear 1-03-44 supports and aligns distributor on block. | $51.21 | $0.00 |
| 1-03-47 | 1-03-47 | PEDESTAL-Fastens to bottom of distributor and mounts on engine block. | $25.59 | $0.00 |
| 1-03-48 | 1-03-48 | GASKET FOR BASE OF DISTRIBUTOR-Size .006 thick. | $1.31 | $0.00 |
| None | 1-03-48a | GASKET FOR BASE OF DISTRIBUTOR-Size .020 thick. | $1.31 | $0.00 |
| 1-03-49 | 1-03-49 | BOLT-Fastens pedestal 1-03-47 to distributor. | $0.77 | $0.00 |
| 1-03-50 | 1-03-50 | NUT-Fastens distributor to engine block. | $0.99 | $0.00 |
| 1-03-5-1 | 1-03-51 | LOCK WASHER-With nut 1-03-50. | $0.28 | $0.00 |